-
BruNoMore
-
Special Total utilisateur
Je vends mon ampli Fender Machete combo 50w tout lampe
"First Production Run" numéroté!!!
date d'achat 28 mars 2012
Valeur 1800€ vendu 1490€
Vendu avec carton d'origine, housse, footswitch, roulettes, facture et garantie 5 ans
visible en région Nord Pas de Calais
Series: Machete™
Amplifier Type: Lampe
Electronics
Controls:
6dB Input Attenuation Switch, Channel One: (Gain, Volume, Low, Mid, High, Notch), Channel Two: (Gain, Volume, Low, Mid, High, Notch), Reverb, Speaker Damping
Weight And Dimensions
Amplifier Length: 11.5' (29.2 cm)
Amplifier Width: 24.5' (62.2 cm)
Amplifier Height: 22' (55.88 cm)
Amplifier Weight: 71 lbs (32.2 kg)
Speakers
Speaker: One - 12' Celestion® Vintage 30
Total Impedance: 4, 8 or 16 ohms (Selectable)
Controls And Connections
Channels: Two
Inputs: One - 1/4'
Effects: Reverb
Effects Loop: Oui
Line Out: One - (XLR with Ground Lift)
Speaker Jack: Two 1/4' Parallel
Tubes
Pre Amp Tubes: 5 X 7025/12AX7A
Power Tubes: 2 X 6L6GC
Accessories
Cover: Fitted Cover Included
FootSwitch: 4-Button Footswitch Included
Miscellaneous
Other Features:
Input attenuation (6dB) provides cleaner response when used with pre-amplified or high-output instruments.
Push-pull gain knob adjusts channel one preamp-gain level.
Push-pull channel one volume knob for extra preamp gain boost (also controllable from the Machete footswitch or MIDI commands).
Notch control on both channels adjusts mid-notch frequency for a variety of U.S. and U.K. tonal flavors.
Built-in reverb adjusts reverb level for both channels.
Speaker damping control for selecting loose or tight speaker response.
Rear-panel power amp mute switch for silent recording.
Rear-panel XLR line output with cabinet emulation switch.
Rear-panel MIDI input.
Rear-panel speaker impedance selector (4, 8 or 16 ohms)
échange possible contre ampli blues, prix en rapport
"First Production Run" numéroté!!!
date d'achat 28 mars 2012
Valeur 1800€ vendu 1490€
Vendu avec carton d'origine, housse, footswitch, roulettes, facture et garantie 5 ans
visible en région Nord Pas de Calais
Series: Machete™
Amplifier Type: Lampe
Electronics
Controls:
6dB Input Attenuation Switch, Channel One: (Gain, Volume, Low, Mid, High, Notch), Channel Two: (Gain, Volume, Low, Mid, High, Notch), Reverb, Speaker Damping
Weight And Dimensions
Amplifier Length: 11.5' (29.2 cm)
Amplifier Width: 24.5' (62.2 cm)
Amplifier Height: 22' (55.88 cm)
Amplifier Weight: 71 lbs (32.2 kg)
Speakers
Speaker: One - 12' Celestion® Vintage 30
Total Impedance: 4, 8 or 16 ohms (Selectable)
Controls And Connections
Channels: Two
Inputs: One - 1/4'
Effects: Reverb
Effects Loop: Oui
Line Out: One - (XLR with Ground Lift)
Speaker Jack: Two 1/4' Parallel
Tubes
Pre Amp Tubes: 5 X 7025/12AX7A
Power Tubes: 2 X 6L6GC
Accessories
Cover: Fitted Cover Included
FootSwitch: 4-Button Footswitch Included
Miscellaneous
Other Features:
Input attenuation (6dB) provides cleaner response when used with pre-amplified or high-output instruments.
Push-pull gain knob adjusts channel one preamp-gain level.
Push-pull channel one volume knob for extra preamp gain boost (also controllable from the Machete footswitch or MIDI commands).
Notch control on both channels adjusts mid-notch frequency for a variety of U.S. and U.K. tonal flavors.
Built-in reverb adjusts reverb level for both channels.
Speaker damping control for selecting loose or tight speaker response.
Rear-panel power amp mute switch for silent recording.
Rear-panel XLR line output with cabinet emulation switch.
Rear-panel MIDI input.
Rear-panel speaker impedance selector (4, 8 or 16 ohms)
échange possible contre ampli blues, prix en rapport
