vous pouvez mettre le firmware de cet ampli a jour à partir du site de line 6
J ai fais l upgrade ,ca se fait facilement et puis ben la ca change le son(en bien)
The 1.10 update includes 4 updated amp models:
- The Diamond Plate and Treadplate models had a small tweak to improve the authenticity of the bottom end.
- The JCM2000 TSL model was replaced with a JCM2000 DSL on the Classic Gain - Crunch channel with the Deep switch in and the Tone Shift switch out. In addition the front end was driven with a Prescription Electronics Germ pedal. The Germ gives it this incredible extra kick to the crunch, and opens up the top end. The rig belongs to Matt Scanell from Vertical Horizon. It is his studio rig, for which he takes out a duplicate set live.
- The JCM800 model was replaced as well. We found an 80's mint 100W JCM800 with a simple Bogner mod for high gain. The amp sounds incredible. The mod adds gain and tonality to the first 4 gain stages. I hope you guys love this new model as much as we do.
Additionally we re-worked the channel volume response to help the clean models better match the RMS level of the higher gain models.
The cabinets are completely re-voiced. We spent a lot of time listening and further tweaking the cabs to get the bottom end under control, and to open up the top end as much as appropriate to the original cabinet.
The Direct outputs are much improved. We re-shot our convolutions here at the studio with some Neve 1073's, 33609's and an Apogee PSX100. The added authenticity, clarity and tone that this world class front end provides is simply incredible.
The U-Vibe and Rotary models are improved; The Uni-Vibe got its lumpiness back, and the Rotary had its bottom end cleaned up (from HD147).
Finally we moved the compressor pre channel volume. In the original 1.0 revision, it is post channel volume. Moving it pre channel volume will allow you to adjust the level of the channel after the compressor has done it work. This should allow for even more gain availability to clean channels, and a more intuitive interface overall.
J ai fais l upgrade ,ca se fait facilement et puis ben la ca change le son(en bien)
The 1.10 update includes 4 updated amp models:
- The Diamond Plate and Treadplate models had a small tweak to improve the authenticity of the bottom end.
- The JCM2000 TSL model was replaced with a JCM2000 DSL on the Classic Gain - Crunch channel with the Deep switch in and the Tone Shift switch out. In addition the front end was driven with a Prescription Electronics Germ pedal. The Germ gives it this incredible extra kick to the crunch, and opens up the top end. The rig belongs to Matt Scanell from Vertical Horizon. It is his studio rig, for which he takes out a duplicate set live.
- The JCM800 model was replaced as well. We found an 80's mint 100W JCM800 with a simple Bogner mod for high gain. The amp sounds incredible. The mod adds gain and tonality to the first 4 gain stages. I hope you guys love this new model as much as we do.
Additionally we re-worked the channel volume response to help the clean models better match the RMS level of the higher gain models.
The cabinets are completely re-voiced. We spent a lot of time listening and further tweaking the cabs to get the bottom end under control, and to open up the top end as much as appropriate to the original cabinet.
The Direct outputs are much improved. We re-shot our convolutions here at the studio with some Neve 1073's, 33609's and an Apogee PSX100. The added authenticity, clarity and tone that this world class front end provides is simply incredible.
The U-Vibe and Rotary models are improved; The Uni-Vibe got its lumpiness back, and the Rotary had its bottom end cleaned up (from HD147).
Finally we moved the compressor pre channel volume. In the original 1.0 revision, it is post channel volume. Moving it pre channel volume will allow you to adjust the level of the channel after the compressor has done it work. This should allow for even more gain availability to clean channels, and a more intuitive interface overall.
