Monter un p94

The P-94 pickup comes with two insulated lead wires plus a bare wire twisted
with a green lead (note: there may be a red wire included, this is a “dead” lead
which you may cut). Connect either the white or black lead wire to the volume
control and connect the other lead to ground. If you get a thin sound with both
pickups in operation, you may need to change the polarity of the pickup. Simply
reverse the lead wires to do this.
If you are using both the P-94T and P-94R together, use the black lead on one
position, and the white lead for the other. This will give you hum-cancelling
operation when both pickups are in use.