Made in USA S71 Custom Shop Prototype modern Stratocaster Caribbean Blue Burst, magnifique manche de luthier Birdseye Duckbeak en érable fabriqué aux États-Unis. Corps en aulne sélectionné, micros ’Bobinés-main’ simple-bobinage «Hot Custom», Tremolo à 2 points Gotoh Japan, mécaniques Gotoh Magnum Lock, électronique cablé-main avec condensateur PIO.
- Selected Alder two pieces body made by luthier, Caribbean Blue Burst nitro finish w high gloss bi-composant P.U. lacquer.
- High-grade made in USA Birdseye all maple neck, Duckbeak « John Suhr style » (detailed specs below).
- 10 radius fretboard, Medium C profile, 22 Medium/Jumbo frets, 43mm at nut, Abalone inlays.
- Handwound « Hot Custom « Alnico V Pickups, real handwound 2h of winding per pickup (detailed specs below).
- Modern two point floating Gotoh Japan bridge w Steel saddles & heavy Steel block, push-in arm. Heavy genuine Floyd-Rose screws « in wood « for more Sustain.
- Handwired electronic w « 7-sounds Stratocaster » mod, PIO Capacitor.
- « 7-sounds Stratocaster » mod via Push-Pull Tone, which allows the bridge + neck pups in parallel on the 1st blade switch position and all the three pickups in parallel on the 2nd position.
- 5-way switch Oak Grisby USA, Volume-Tone-Tone Gotoh japan, 1 Push-Pull tone to activate « 7-Sound » mod.
- Gotoh Japan SG381 MAGNUM Locking tuners, locking wheel in the back. One of the best tuner on the market.
- Dome Chrome Knobs made by Gotoh Japan, made from heavy brass.
- Genuine Graph-tech TUSQ XL nut, Made in Canada. Auto-lubricated for a better tuning stability.
- Neck Plate w random Serial Number.
- Hardcase and Custom Shop certificate included.
Build as a prototype for test purposes.
Everything works perfectly fine, some imperfection in the finish only.
Guitar Neck Features:
- These are exceedingly high quality necks made in the USA.
- Neck Wood: Birdseye Maple
- Fretboard Radius: 10 inch
- Medium C shaped profile .84 at first fret, .90 at the 12th fret
- Frets: 22 Med/Jumbo Frets
- Scale Length: 25-1/2’
- Width at Nut: 43 mm or 1 11/16ths
- Inlay: Abalone
- Dual acting rod located at the heel
- Finish: Lacquer
Alnico V Hot Custom Pickups specs:
- Neck – 5.9 K AWG 42 wire
- Middle – 5.8 K AWG 42 wire RW/RP NON HUM in 2 and 4 position
- Bridge – 13 K AWG 44 wire Hot overwound
Livraison gratuite.
Vendue avec certificat du Custom Shop, coffre en dur et facture
----------------
Prix de vente : 1300 euros
----------------
![]()
![]()
![]()
![]()
![]()
![]()
- Selected Alder two pieces body made by luthier, Caribbean Blue Burst nitro finish w high gloss bi-composant P.U. lacquer.
- High-grade made in USA Birdseye all maple neck, Duckbeak « John Suhr style » (detailed specs below).
- 10 radius fretboard, Medium C profile, 22 Medium/Jumbo frets, 43mm at nut, Abalone inlays.
- Handwound « Hot Custom « Alnico V Pickups, real handwound 2h of winding per pickup (detailed specs below).
- Modern two point floating Gotoh Japan bridge w Steel saddles & heavy Steel block, push-in arm. Heavy genuine Floyd-Rose screws « in wood « for more Sustain.
- Handwired electronic w « 7-sounds Stratocaster » mod, PIO Capacitor.
- « 7-sounds Stratocaster » mod via Push-Pull Tone, which allows the bridge + neck pups in parallel on the 1st blade switch position and all the three pickups in parallel on the 2nd position.
- 5-way switch Oak Grisby USA, Volume-Tone-Tone Gotoh japan, 1 Push-Pull tone to activate « 7-Sound » mod.
- Gotoh Japan SG381 MAGNUM Locking tuners, locking wheel in the back. One of the best tuner on the market.
- Dome Chrome Knobs made by Gotoh Japan, made from heavy brass.
- Genuine Graph-tech TUSQ XL nut, Made in Canada. Auto-lubricated for a better tuning stability.
- Neck Plate w random Serial Number.
- Hardcase and Custom Shop certificate included.
Build as a prototype for test purposes.
Everything works perfectly fine, some imperfection in the finish only.
Guitar Neck Features:
- These are exceedingly high quality necks made in the USA.
- Neck Wood: Birdseye Maple
- Fretboard Radius: 10 inch
- Medium C shaped profile .84 at first fret, .90 at the 12th fret
- Frets: 22 Med/Jumbo Frets
- Scale Length: 25-1/2’
- Width at Nut: 43 mm or 1 11/16ths
- Inlay: Abalone
- Dual acting rod located at the heel
- Finish: Lacquer
Alnico V Hot Custom Pickups specs:
- Neck – 5.9 K AWG 42 wire
- Middle – 5.8 K AWG 42 wire RW/RP NON HUM in 2 and 4 position
- Bridge – 13 K AWG 44 wire Hot overwound
Livraison gratuite.
Vendue avec certificat du Custom Shop, coffre en dur et facture
----------------
Prix de vente : 1300 euros
----------------
Steven M.
