- Aquarimage
-
Special Ultra utilisateur
- #15
- Publié par
Aquarimage le 16 Oct 2009, 20:34
Ben si, cela me sert:
“patches” for different MIDI program numbers, you can automatically recall a stored patch by sending the correct MIDI
program number from your footswitch. You can assign which audio loops and function switches are on for each and
every patch.
To save a setting to a MIDI program number:
• Select a MIDI program number with your MIDI footswitch or controller.
• Manually select the desired state of each Function Switch and/or Audio Loop using the RG-16’s front panel buttons.
• Hold down the Write Button (1) until the LEDs flash.
You can save up to 256 patches, using MIDI program numbers 1 through 128 in MIDI banks 0 and 1.
Pour le prix: http://www.musik-schmidt.de/ad(...)t=los
Citation:
The RG-16 can receive MIDI messages from any MIDI footswitch or other MIDI controller. By storing different settings, or“patches” for different MIDI program numbers, you can automatically recall a stored patch by sending the correct MIDI
program number from your footswitch. You can assign which audio loops and function switches are on for each and
every patch.
To save a setting to a MIDI program number:
• Select a MIDI program number with your MIDI footswitch or controller.
• Manually select the desired state of each Function Switch and/or Audio Loop using the RG-16’s front panel buttons.
• Hold down the Write Button (1) until the LEDs flash.
You can save up to 256 patches, using MIDI program numbers 1 through 128 in MIDI banks 0 and 1.
Pour le prix: http://www.musik-schmidt.de/ad(...)t=los
