Salut !
Pas du tout un spécialiste de la chose, mais a priori soit tu refais le montage, soit tu passes chez un luthier. On retrouve des infos sur le montage en cherchant sur le net, par exemple ici on donne quelques conseils (apparemment ça demande une certaine précision au niveau du sillet):
Citation:
With any UST it always helps to very slightly round the edges and especially the ends of the saddle - helps to stop it binding in the slot. A couple of strokes with fine abrasive paper is all it needs. If you've still got the problem, then you need to pay attention to absolute flatness along the length of the saddle and its slot base. If the problem is still here, and you are sure these aspects are OK or taken care of, then it sometimes works to apply a few gentle file strokes to the saddle base just above the loud string. Some folks swear by putting vertical slots in the saddle for a few millimetres up from the base to help with balance problems, but I have no personal experience of that. Good luck!
http://www.acousticguitarforum(...)19518
Bonne chance pour la suite !