SAMPLITUDE

Après avoir chercher des posts dans le forum,je suis étonné de voir que quasiment personne ne se sert de ce fabuleux logiciel,et que tout le monde préfere Cubase SX ou 5,ou bien Logic.
C'est vrai que le midi n'est pas la tasse de thé de Samplitude,mais question audio,ça arrache plutôt bien.Quelq'un d'autre l'utilise sur le forum,que je puisse échanger des infos et des tips?

Bonjour,
Voila je teste un peu tous les log pour savoir lequel acheter par la suite. J'ai un soucis sur samplitude de Magix.
Quand j'enregistre le spectre s'affiche, mais impossible de lire par la suite. Aucun son et le curseur n'avance pas signe que la lecture n'est pas en marche.
Quelqu'un pourrait m'aider?

T'as vérifier que t'as les bons drivers audio ou la bonne carte dans outils->config audio?

je sais pas trop, j'y comprends pas grand chose!!!

Déjà est ce que ta guitare rentre bien dans le logiciel?
Sur Sam 8.2 tu peut controler le niveau d'entrée sur la piste
ensuite verifie que la fonction "punch" n'est pas enclenchée dans la barre de transport
Arme la piste en cliquant sur le bouton "R"
sinon verifie que ta carte son soit bien reconnut dans le soft
Imprte un wave ou un Mp3 pour voir déjà si ça dit qquechose en lecture

du bon gros deterrage de topic.......
alors,la version 8 elle dit quoi?

Oops,j'avais pas fait gaffe à l'année
La v8: sympa :des VSti fournit + meilleure gestion du midi + amelioration de la fenetre d'enregistrement + le metronome "wave" qui marche enfin + + + + + + + + + + ++ + ..................;
en tout cas pour l'utilsation que j'en fait ( guitare + basse + drums virtuels et qques synthés) c'est vraiment le pied
pour plus d'info :

http://www.maomusique.com/foru(...)ID=46
et les specs en anglais:

05/18/2005 Samplitude 8.2

-There’s no updated English 8.2 help file available yet, please have a look at the version 8.2 info center at http://www.samplitude.com for further information.


- Enhanced Take Manager

General:
The Take Manager appears in the new manager dialog as a further tab and can therefore always remain open.

When the object is activated the takes matching the object are displayed for standard filters.
With multiple selections (e.g. with multitrack recordings) the last clicked object is used.


Creating takes while recording remains the same. Before recording, the take is either named manually or automatically (e.g during punch-in/loop recording).
The Take Manager can then remain open. After recording, the new take is automatically displayed in the Take Manager.

Following destructive effect calculations, a new take is also created and becomes visible in the Take Manager immediately.

The take is now saved with the VIP. This also enables use of the "Each take in new file" function, which allows you to exchange the takes after reloading the VIPs.


Take Exchange
-1. The take is exchanged by checking the box preceding the currently used take. By default, multi-selection exchanges all objects. With this option switched off only the current track is changed.

-2. Furthermore the takes can also be exchanged directly in the VIP via ctrl+right-click on an object. All matching takes are displayed in a special context menu.


-Take Composer
-Selected takes are positioned above each other in a new Take Composer window (from track 2), all visible takes are used now if none or only one take is selected
-The current take is displayed in track 1 as well (Solo activated)
-The take is played back together with the initial VIP when pressing the Space bar. Ctrl+Space either plays back the selected object (Solo track is then ignored) or the complete
Take Composer.VIP, if no object is selected
-Solo lets you easily switch between takes (Solo is default set to exclusive, normal Solo with Shift+Alt)
- Shift-C (Copy to …) copies selected range to first track
-Special function: modified scissors tool for fast cutting of take sections into the first track. Simply click on the selected In Point with the corresponding tool.
-When closing the project, the first non-muted track can be transferred back to the initial project
- re-transfer to original project is done between punch markers, this way you can extend the working range by moving the markers
-direct access from arranger by object context menu (right click ->select takes) or take selection menu with ctrl right click


Further new functions in the Take Manager:
-Final destructive of a take with corresponding treatment of the undo chain
-Renaming of takes



- Advanced track functionality

- Folder tracks
-Command "Track->Insert->New Folder"
- Empty folder is inserted above the active track
- If tracks are selected via a range, they are inserted in the folder
- Tracks can be moved in the folder by drag & drop
-Folder tracks may be used for visual structuring and grouping of certain processes:
-contained tracks can be hidden together by using the track size button of the folder
track
- Switch Mute, Solo, Lock, Volume, Pan together
- Joint Record switch (in this case the indicated condition corresponds with
the first track of the folder. Of course, switching is only possible with different
input devices)
- Usually you can see all tracks in the folder
- range selection is carried out across all tracks -> range-based cut operations
- An included track can be used as a reference track per track menu
- All objects of this track are copied into the folder and can be used there for joint
object-based cutting operations
-But only if the source material has been grouped beforehand!
- All objects that may have been in the folder track will be deleted.
-This also affects all object effects and object editor operations
(some changes are only applied after clicking on Apply/OK)
- Not visible in the Mixer
- folders are ignored for track numbering in mixer and VIP
- left border and contained tracks are highlighted with folder color
- nested folders possible


-Control grouping in the arranger/ mixer
- Mute / Solo / Record /Monitoring / Volume / Pan / Lock / In+Output Device can now also be selected multiply in the arranger via Shift+Click or Control+Click and are then activated together
- The Shift special functions for Mute (->Mute inactive)/Solo (->exclusive)/Record (->Record all) are still available via Shift+Alt just like in the Mixer
- The controls can be grouped permanently by right-clicking and thereby opening the menu in the upper section (e.g. on Global Mute/Solo) or on the Group buttons in the Mixer.
- Grouping is indicated by the selection marker or the group number respectively
- The in or out devices for several tracks can now be changed together. When routed to one bus the routing order is then accounted for (i.e. from left to right and top to bottom only).
- optional increment of record device with more than one record button selected


-Track Display / Handling , new default skins:
-Improved handling of track heights, particularly in conjunction with invisible
tracks
-neighboring tracks are now no longer changed
-“Track maximize” works like the corresponding button in the arranger (default shortcut Alt-Enter)
“Minimze none” sets all visible tracks to the same height
-“Track minimize” command is no longer available, since large tracks are automatically minimized with the “Track maximize” command
-Partial tracks are displayed at the top or lower screen border for softer vertical scrolling
-Free space below the final track. Context menu for adding tracks available here
(including "New MIDI track" command for preset MIDI input)
-Optional track color-(->Track-Info-Dialog), if activated it’s used for
-Track name in the arranger (skin-dependent)
-Track name in the mixer (skin-dependent)
-optional for audio object wave form (can be set in display options)
-Folder track frame
-optimized default skins:
-track number can now be used for moving tracks even for small track heights
-improved display for many visible tracks


bugfixes:
-drawing problems with hidden tracks –fixed
-no change of track heigths when adding tracks
-mixer selection was lost after using the mixer scroll bar -fixed
-problems with grouping and alt shift - fixed



Mixer / Effects

-Vintage Effects Suite Pro:
CORVEX : chorus-flanger
ECOX : analog delay
FILTOX : modulating filter

- non blocking FX dialogs
-all FX except Dynamics / Distortion in object / track
-surround / EQ window close buttons now working as OK instead of Cancel
-more than one EQ dialog available
-Delay / Reverb non blocking
- non blocking FX dialogs marked with application icon


- Object FX extensions
- Delay / Reverb available as object FX
- object DX / VST plugins available as Pre / Post
-improved behavior of object FX with denormalised audio material


-Elastic Audio
- improved frequency detection for quiet audio material, compatibility is maintained when loading older projects, detection is switched to new mode when applying new detection or resetting TS/PS effect
- shift click multi selection of slices
- graphics optimisation
- close button now applies changes
- redo
- double click on slice opens slice editor
- double click can be used to switch tracks
- several fixes

- frequency matching
- new option to transfer frequencies with object FFT filter
- set play cursor to source audio material -> new preset
- set play cursor to destination audio material -> select preset
- similar method for offline FFT Filter

Surround:
-surround volume fader in arranger scales all surround channels
-surround volume automation (drawing only, all channels use one curve only)
-surround bouncing to interleaved WAV now uses WaveFormatExtensible chunk and automatic switch to RF64 format when reaching 2 GB limit
-visualisation in surround projects without stereo master now starts as surround visualisation
-update of automated surround panner when moving the play cursor


bugfixes:
-problems with vocoder and ampsim after cut or freeze operations -fixed
-play start problems of am-track –fixed
-problems after leaving EQ dialog with return key - fixed
-Elastic Audio: curve points at object borders could be displaced sometimes - fixed
-object length in object editor did jump when switching Elastic Audio automation -fixed
- several fixes for multiband dynamics


MIDI / VST / VSTi / Rewire / Instruments

MIDI Editor
Editing
- Notes can now be dragged forwards as well (start position is changed).
- New modifier for note lengths can be pulled into the matrix:
Shift: Sets equal lengths for all selected notes
Ctrl: changes the lengths in a relative manner
- Legato function for notes
- MIDI panic function for played editor notes (click below MIDI keyboard or via shortcut)
- Line tool for controller editor


Display
-option for MIDI channel colors
- improved display of selected notes for velocity display and MIDI channel colors
- improved grid display in controller editor



Shortcuts
- Shortcuts for tool selection in the Controller Editor
- Key repeat is no longer unnecessarily stopped for zooming (Ctrl+Cursor)
- Shortcuts: RETURN to close, ESC to cancel
- 'Z' for temporary zoom mode
- MIDI Editor shortcuts can be changed with shortcut editor, automatic consistency with VIP shortcuts like Zoom,…
- CursorUp / Down changes pitch
- current shortcut assignments are shown in tooltips.


Event List / Numerical Editing
- Edit fields now even effect multi selection for byte 2
- "Position" edit field now effects non-note event (e.g. controller) as well as selected notes and other selected events simultaneously
-direct editing in MIDI event list: relative editing by click and drag
(except MIDI channel - always absolute), absolute editing by double click and value editing (except positions, which keeps note lengths).
- display of selected non-note events by red line in grid – e.g. for exact positioning of program change events



-MIDI punch / loop recording
- now creating takes for take manager
- MIDI Editor now receives correct update for overdub/replace recording from object opened in the recording
- MIDI Punch recording (loop recording or. overdub/replace): now correct monitoring and no more wrong jumps
-MIDI loop recording normal and replace: only complete loops are recorded (as with audio loop recording)


- MIDI metronome uses tempo maps


VST
- Support for VST WaveShell (for Waves version 5 and above) including automation
- improved parameter resolution with VST automation
- Tempo Maps for VST / Rewire
- VST Fx receive MIDI input while monitoring
- improved display of VSTi and VSTi output names
-improved automatical MIDI solo routing to VSTi audio tracks (isn’t performed anymore, when there are MIDI objects on the track, works for monitoring now)
-latency compensation for Powercore and UAD VSTi instruments in non-monitoring mode
- improved and accelerated Rewire client startup

-Robota:
- improved BPM Sync
- complete saving / loading of setups with project

Bugfixes
-problems when loading very short MIDI files – fixed
- VSTi monitoring with FX did activate audio monitoring -fixed
- zooming beyond MIDI object borders -fixed
- zoom in keeps play position visible
- graphics refresh for range changes
- shortcuts for destructive MIDI file editing
- "Open Object Editor " and "Track Options…" didn’t always use the current object -fixed
- casual display jump to current note - fixed
- Event-Chasing could send MIDI to more several channels -fixed
- Rewire: note on with velocity 0 is now changed to note off (Reason couln’t understand these)
- MIDI metronome confusion when playing loops - fixed.
- unnecessary reset of VSTi monitoring when switching windows -fixed



-General:
Shortcut editor:
-tree structure for better overview
-search functions for menu commands and shortcuts
-integration of MIDI editor commands, mouse wheel functions, temporary hotkeys (K,L,…) and
several options
-new temporary snap key for switching snap behaviour
-several options for displaying or exporting shortcut list


Manager:
-color highlighting for current or last play position in marker or objects manager
-new track manager options (inactive, exclusive solo)
-improved sort order for markers ( 9 before 10)


-playback /record
-Automatic punch marker for punch-in recording with loop
-Optimized loop recording (objects are only created and drawn after completed loop cycles)
-new functionality of O-Ton Mode: with additionally activated CD Arrangement Mode, CD markers are used instead of objects
-display of mutes caused by trackspeed overloads with a „.“ after playback error display
-MIDI sync without (possibly invalid) time stamp


file handling / bouncing / CD burning
-new options to set track names from object names or object file names in menu
„track info dialog -> file name -> all“
-freeze format options in bouncing dialog
- improved loading of projects with changed drive letters , WAV files are additionally searched in drive of VIP or in alternate drive after manual selection of first new WAV file
-new CD-R burning speed detection, ini option for using old CD-R speed recognition
[Setup]
OldCDBurnSpeed=1

-display / colors
-Changed object color is now also displayed when the Object Editor is opened
-new option for system dialog -> colors -> reset: „Set Object Background to track colors “ (may reset object sample color if equal and switches off „Track colors “ option for wave display
-all color picker dialogs now with right click menu for color presets

-extended zoom history:
-any zoom out after zooming in by vertical mouse drag in grid, by zoom lasso or zoom to range resets to original zoom level or positions (can be bypassed with ctrl click to arranger zoom out button)

-video
- improved time resolution for video frame display (were 22 samples off before)
- improved video timeline: single frames for high zoom levels
-File drag’n’drop in media link dialog


HW Control Panel:
-new function for jump to markers or CD markers (for up tp 32 markers, set number in track edit)
-new function for selecting mixer snapshots


- new Windows domain administration
- new option for Tap BPM in transport window
-ini entry for disabling of mixer following active track
[Factors]
DisableMixerFollowArranger=1



Bugfixes:
-several DeadLocks for Undo during playback– fixed
-Card-dependant problems with ASIO drivers (e.g. clicking when opening the ASIO control panel) – fixed
- Record status of objects was not deleted when the recording was stopped using the toolbar button – fixed
- Problems with the Declicker preset - Extension *.dclk in the Declipper (*.dcl) – fixed
-casual manager hangups- fixed

-improved behavior at record stop caused by full hard discs – fixed
-improved behavior with terminated or non-responding dongle driver
-FTP download crash when closing FTP dialog while downloading -fixed
- improved unfreeze with moved projects
- record switch in track manager didn’t work for MIDI –fixed
- Real export: mono/stereo options were switched - fixed
- audio recording as sync slave did show MIDI dialog - fixed
- mute / solo in track manager for multi selection were slow due to several undo steps -fixed
- freeze cancel didn’t work for multiple objects -fixed
- vertical scroll bar could hang with zoom lasso -fixed
- ZLM monitoring with „Record while Play“ didn’t work since 8.1 -fixed, ZLM can now be switched on and off during recording
-VIP and zoom snapshots of template VIP’s didn’t work -fixed
-FX monitoring did consume CPU power even if RecMon was switched off – fixed
-„Multi I/O Stereo“ preset didn’t work after mono preset - fixed
- missing CD index renumbering after ripple - fixed
- SEKD Declicker didn’t work since 8.1 - fixed
- play solo problems in object editor - fixed
- play solo did reset loop flag - fixed
- loop mode wasn’t saved with the project- fixed
- problem with time edit window on 2nd monitor - fixed
- 2 channel surround was not restored from mixer snapshots– fixed
- metronome in punchin mode couldn’t be switched from transport window - fixed
-snap problems with Feet / Frames - fixed
-copy of markers between VIP and WAV project often resulted in doubled markers
- fixed
-closing of object-DX/VST dialogs when creating an undo step (e.g.. Solo/Mute…)-fixed
-"TOC list" – casual wrong time display when called from marker manager - fixed
- small record window: enter key did stop recording -fixed
- punch recordings < 300ms where ignored - fixed
- trackspeed: increased disc load when using object FX with latency - fixed
- trackbouncing with trackspeed: increased disc load when using FX with latency - fixed
- wrong column captions in file browser–fixed
- display problems in surround panner after minimizing –fixed