Conseil Pédale ABY active

Les trois commutateurs en façade offrent un contrôle précis : l'isolement de la masse pour éliminer les boucles de masse, l'inversion de phase pour s'assurer que vos amplis sont parfaitement alignés en phase, et la levée de masse pour déconnecter la masse du câble.

The BigShot ABY makes it easy to switch between two amps. With the built-in isolation transformer, hum and buzz caused by ground loops can be eliminated. A separate tuner out keeps this tone altering device out of the main signal path.

La Radial BigShot ABY est une pédale de commutation ABY passive, permettant de basculer entre deux amplis ou de les combiner, tout en éliminant les buzz grâce à un transformateur d’isolation intégré.

Using the BigShot ABY is simple. It is designed to allow you to toggle between two amps or play
both amps at the same time. Because the audio circuit is 100% passive, the guitar signal is switched
directly for true bypass performance. This also means that when you are driving more than one amp,
you will notice a slight drop in volume because the signal is split to drive more than one input. The drop
in level can be more noticeable with lower output pickups. This is normal as there is no preamplifier
or buffer in the BigShot ABY circuit. Placing a preamp or buffered pedal before the BigShot ABY will
minimize this effect when driving two amps at the same time.