Rastacouair a écrit :
neozecat a écrit :
C'est quoi les changements apportés entre les modèles 2009 et 2010 ?
C'est 2009 en fait.
# Nylon 6/6 nut
# Improved ABR-1 bridge (no-wire, tighter tolerances)
# Historically correct nickel-plated brass bridge saddles
# Correct alloy saddle adjustment screws
# Bridge height-adjusting thumbwheels are now thinner
# Neck profile changed - now has less "shoulders"
# Audio taper CTS pots
# '50s wiring
# Pickup routes adjusted so that pickups will be parallel to the strings
# Top carve changed to be closer to several original '59s that were scanned
# Body perimeter change - slightly tighter in waist, cutaway area refined to be more like originals
# The maple cap is very slightly thinner, the mahogany body is very slightly thicker
# The fingerboard is slightly thinner
# The step from neck heel to back of body is taller and more correct
# The taper of the "maple window" under the binding in cutaway is more accurate
# The maple spline (filler strip) in the tenon is more accurate
# The edge radius on the backside of the body is tighter (less rounded)
# The "mustache curve" of the headstock top has been flattened slightly
# The control cavity plate has been relocated, has the correct side taper, and now uses the correct ABS plastic
# The pickguard shape has changed slightly
# The pickguard bracket and screw have been changed
# The truss rod cover has been reshaped to be more accurate
# The serial number location is slightly lower and more correct
# Dial pointers are less sharp
# The strap button screws are longer
# The jack hole is now the correct 1" diameter
# The toggle switch nut has more correct knurled pattern
C'est bien ce qu'il me semblait mais comme dans ton message tu parlais de 2010, ça m'a fait douter
