slowhand73 a écrit :
2009 nylon 6/6 nut
2009 Improved ABR-1 bridge (no-wire, tighter tolerances)
2009 Historically correct nickel-plated brass bridge saddles
2009 Correct alloy saddle adjustment screws
2009 Bridge height adjusting thumbwheels now steel, rather than brass and are thinner
2009 Neck profile changed - now has less "shoulders"
2009 Audio taper CTS pots
2009 '50s wiring
2009 Pickup routes adjusted so that pickups will be parallel to the strings
2009 Top carve changed to be closer to several original '59s that were scanned
2009 Body perimeter change - slightly tighter in waist, cutaway area refined to be more like originals
2009 The maple cap is very slightly thinner, the mahogany body is very slightly thicker
2009 The fingerboard is slightly thinner
2009 The step from neck heel to back of body is taller and more correct
2009 The taper of the "maple window" under the binding in cutaway is more accurate
2009 The maple spline (filler strip) in the tenon is more accurate
2009 The edge radius on the backside of the body is tighter (less rounded)
2009 The "mustache curve" of the headstock top has been flattened slightly
2009 The control cavity plate has been relocated, has the correct side taper, and now uses the correct ABS plastic
2009 The pickguard shape has changed slightly
2009 The pickguard bracket and screw have been changed
2009 The truss rod cover has been reshaped to be more accurate
2009 The serial number location is slightly lower and more correct
2009 Dial pointers are less sharp
2009 The strap button screws are longer
2009 The jack hole is now the correct 1" diameter
2009 The toggle switch nut has more correct knurled pattern
